Experimental investigation of tool wear and machining rate in rotary ultrasonic machining of nickel alloy

Nickel alloys possess the excellent potential at high temperature and resistance to oxidation/corrosion owing to its high nickel content. These materials necessitate non-traditional machining methods. The rotary ultrasonic machining (RUM) process comes into existence as a superior alternative to the conventional machining of nickel alloys. The processing of these alloys using RUM needs attention. This article details the multi-response optimization in RUM of nickel alloy using the desirability concept. The present work is carried out with two shapes of the tool: (i) Plain tool and (ii) lateral slotted tool. During RUM, the process parameters—power rating tool rotation, abrasive diamond grit size and feed rate are varied. Compared with the plain tool, the lateral slotted tool shows the more efficient machining rate (MR) with less tool wear (TW). The micro-graphs disclose the mechanism of MR and TW during RUM.     

Preparation and functional evaluation of agarose derivatives

A facile microwave‐assisted one‐pot synthesis of sodium carboxymethylagarose and calcium carboxymethylagarose from Gracilaria dura agarose (Ag) has been described. The process is user friendly, and the highest degree of substitution was obtained within 15 min compared with the conventional method, which requires more than 3 h. Solubility and gelling behavior of the modified Ag products were found to be dependent on degree of substitution of the products. The characterizations were done by using Fourier transform infrared spectroscopy, ¹H‐ and ¹³C‐nuclear magnetic resonance spectroscopy, thermogravimetric analysis, scanning electron microscopy, Inductively coupled plasma spectrophotometry (ICP), rheology, conductometer analysis, and DNA gel electrophoresis. These agarose derivatives were easily soluble in water and exhibited low thermal hysteresis, improved conductivity, and improved the DNA resolution ability of the parent G. dura Ag hydrogels. These hydrogels may have potential applications in the areas including electrochemical devices, microbiology, biomedical, and pharmaceuticals fields. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40630.     

Solid‐state NMR study of spin finish of thermally treated PAN and PAN/CNT precursor fibers

Dry‐jet wet‐spun polyacrylonitrile (PAN) and PAN/carbon nanotubes (CNTs) precursor fibers coated by spin finishes were characterized using the solid‐state ¹H nuclear magnetic resonance technique. Series of fiber samples were prepared upon thermal treatment at different temperatures (room temperature to 180°C). Using the Hahn echo sequence, relatively mobile components were identified and the effect of the heat treatment on those components was studied. It was observed that the mobile components are mainly the spin finishes. Heat treatment caused loss of one of the spin finishes (Type B) to a great extent (～80%), whereas the other two spin finishes (Type A and Type C) were more stable. Additional information regarding the change in molecular mobility due to heat treatment was obtained by the spin‐lattice relaxation time ( T₁ ) analysis. It was found that the presence of CNT affects the T₁ relaxation time of the polymer in the composite fiber, however, that of relatively mobile components remains unaffected. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40734.     

Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.     

Morphological and Elemental Investigations on Co–Fe–B–O Thin Films Deposited by Pulsed Laser Deposition for Alkaline Water Oxidation: Charge Exchange Efficiency as the Prevailing Factor in Comparison with the Adsorption Process

Catalysis Letters - Mixed transition-metals oxide electrocatalysts have shown huge potential for electrochemical water oxidation due to their earth abundance, low cost and excellent...     

Subthreshold Current Modeling of Stacked Dielectric Triple Material Cylindrical Gate All Around (SD-TM-CGAA) Junctionless MOSFET for Low Power Applications

Silicon - Stacked Dielectric Triple Material Cylindrical Gate All Around (SD-TM-CGAA) Junctionless MOSFET has been explored for low power applications. This paper presents an analytical model of...     

A Novel Approach to Model Threshold Voltage and Subthreshold Current of Graded-Doped Junctionless-Gate-All-Around (GD-JL-GAA) MOSFETs

Silicon - This present article interprets the analytical models of central channel potential, the threshold voltage, and subthreshold current for Graded-Doped Junctionless-Gate-All-Around...     

Applicability of Field Plate in Double Channel GaN HEMT for Radio-Frequency and Power-Electronic Applications

Silicon - In the present communication, for the first time, applicability of Field Plate (FP) for Double Channel (DC) AlGaN/GaNHEMT is demonstrated. Impact of design space parameters such as field...     

Rheological Behavior of Polycarbosilane Part II: Effect of Heterometal (Al) Content and Nature of Bonding with Si of Polycarbosilane

A few aluminum containing polycarbosilanes named AlOR-PCS and Alac-PCS have been synthesized by the reaction of aluminum isopropoxide (AlOR) and aluminum acetylacetonate (Alac) with polycarbosilane (PCS), respectively. These materials were characterized by Fourier Transform Spectroscopy (FTIR), Thermo gravimetric Analysis (TGA) and Gel Permeation Chromatography (GPC). The rheological properties of these compounds were studied with respect to time, temperature and atmosphere (inert & air). It has been observed that the increase in metal content enhances the crosslinking of the PCS chains. Under similar conditions, the crosslinking of AlOR-PCS derivatives was found slower than Alac-PCS. GPC analysis of the samples showed the increase in molecular weight of these compounds compared to virgin PCS. TGA showed improved ceramic yield with increasing metal content. Alac-PCS gave higher ceramic yield than AlOR-PCS for similar molar ratios of metal complexes.     

Earthworm coelomocytes as nanoscavenger of ZnO NPs

Earthworms can ‘biotransform’ or ‘biodegrade’ chemical contaminants, rendering them harmless in their bodies, and can bioaccumulate them in their tissues. They ‘absorb’ the dissolved chemicals through their moist ‘body wall’ due to the interstitial water and also ingest by ‘mouth’ while soil passes through the gut. Since the advent of the nanotechnology era, the environmental sink has been continuously receiving engineered nanomaterials as well as their derivatives. Our current understanding of the potential impact of nanomaterials and their natural scavenger is limited. In the present investigation, we studied the cellular uptake of ZnO nanoparticles (NPs) by coelomocytes especially by chloragocytes of Eisenia fetida and their role as nanoscavenger. Results from exposure to 100- and 50-nm ZnO NPs indicate that coelomocytes of the earthworm E. fetida show no significant DNA damage at a dose lower than 3 mg/l and have the potential ability to uptake ZnO NPs from the soil ecosystem and transform them into microparticles.